|
|
Figure No. 37. Minimum
Spacing for Cold Water Conduit in Floor Screeds |
 |
Conduit
in Floor Conduit pipes should be fixed to the sub-floor by using suitable
straps to prevent movement. Conduit pipes for cold water systems should
not be run in floor screeds which incorporate underfloor heating 'loops'.
Figure No. 38. Conduit
Terminal Fittings
|
|
|
For terminating the conduit pipe at wall and floor finish level for
direct 15mm connections to appliances, a conduit terminal fitting
is available (HX101/15). For floor terminations the plastic housing
may be drilled through the base to allow fixing. Floor termination
procedure is shown in Figure No. 39.
Figure No. 39. HX101/15
Conduit Terminal Instalation Procedure |
|
|
