Hep2O® - Supporting Pipe Work

Pipe Support

page 1 - page 2 - page 3

The Hep2O® system includes two types of pipe clip, the screw fix type (HX85) and the nail type (HX65). The nail type is primarily designed for use on concealed pipework, and allows for rapid fixing to timber. The screw type may be used together with a spacer (HX86) which allows a greater spacing between the pipe and the fixing background.

The spacer therefore allows different pipe fixing centres which can be used to facilitate pipe cross-overs or the installation of thermal insulation to the pipe (see Figure No. 22). A cold forming bend fixture (HX75) is available to allow the formation of a bend on 15mm and 22mm pipes for situations where secure fixing and neatness are important. (See Figure No. 23).

Figure No.21 Pipe Clips

Code	Nominal Diameter
HX65/10	10
HX65/15	15
HX65/22	22
HX65/28	28

Pip Clip - Nail

Code	Nominal Diameter
HX85/15	15
HX85/22	22
HX85/28	28

Pipe Clip- Screw

Code	Nominal Diameter
HX86/15	15
HX86/22	22

Pipe Clip - Spacer

Nominal Diameter mm	Dimension A mm	Dimension B mm
15	17	40
22	21	43
28	24	46

Figure No. 22
Pipe Fixing Centres

Note:
Fixing hole sizew is 5mm diameter.

Wavin is the leading supplier of water management and drainage systems for the Building, Construction and Utilities markets in the UK