Hep2O® - Manifolds and Microbore Plumbing

Manifolds/Microbore Plumbing

Hep2O® Manifolds are designed for use on microbore central heating systems and can also be used for hot and cold water.

The Hep2O® Manifold in one fitting brings together multiple 10mm pipe connections on the flow or return pipework to one area of a building, enabling easy access when used in conjunction with the Hep2O® Routabout system. Thus providing instant access below sheet flooring installations for future system modifications or extension.

A comprehensive range of Hep2O® Manifolds is available (Figure No. 25) and these manifolds can be connected in series allowing any number of outlets.

Installation and Performance Benefits

	The Hep2O® 2 Port and 4 Port Manifolds provide a cost effective way of connecting 22mm pipe to 10mm pie as they reduce the number of fittings required.
	Fewer fittings reduces installation time.
	One of the main advantages of the new Hep2O® Manifolds is that they are manufactured from polybutylene, an extremely robust yet lightweight material and are therefore, much easier to install.
	The lightweight Hep2O® polybutylene manifolds enable the pipe to be suspended between joists without fear of dragging the pipe down.
	Blanking Pegs can be used to close off any unused sockets.

Wavin is the leading supplier of water management and drainage systems for the Building, Construction and Utilities markets in the UK