Hep2O® - Handling and Storage

Handling and Storage

Hep2O® is an extremely tough and durable system however, as with all materials some care is required to ensure damage is not incurred during storage or installation which may impair its ultimate performance. Straight lengths of Hep2O® pipes may be laid flat or stacked vertically. Coils may be laid on their side or edge. Both are lightweight and easy to carry and handle. Pipe and fittings wherever possible should be stored in their original packaging. This ensures protection from ultra violet light and will reduce the risk of contamination. Spare grab wedges and 'O' rings should not be carried loose amongst other fittings or tools where they may be damaged.
	Figure No. 67 Hep2O® Straight Coiled Pipe
They should be kept in their original packaging or in a separate container which will protect them. Hep2O® should be protected from contact with petroleum and oil derivatives. When carrying or installing Hep2O® pipe, care should be taken to avoid dragging the pipe along the ground or damaging the pipe on other surfaces such as walls. When feeding pipe through holes in walls and brickwork the pipe end should be taped over or the red cap included in the pipe coil be used to prevent damage to the jointing surface and debris entering the pipe. Care should be taken to avoid kinking the pipe during installation.