Hep2O® - Connection to the Acorn System

Connection to the Acorn System

Hep2O® is fully compatible with its predecessor the Acorn® system previously manufactured by Bartol®. Pre 1984 Acorn® 22mm pipe was manufactured with a thicker wall and requires a different support sleeve.

If carrying out remedial work on such an Acorn® system please contact the Hep2O® Technical Advisory Service Tel: 0870 460 5578 Fax: 0870 460 5579 for advice.

Remember: Hep2O® Pipe is fully compatible with all versions of Hep2O® Fittings.

Note: Internal components of the current Hep2O® Fitting (Cap, BiTite® Grab Wedge, Wedge Support Ring and 'O' ring) are not in any way compatible with original Hep2O® Fitting components (Cap, 'O' ring, Spacer Washer and Grab Ring) and therefore bodies and components must NOT be mixed.
For further information contact Hep2O® Technical Advisory Service - Tel: 0870 460 5578.