Hep2O® - Connection Using Compression Fittings

Connection Using Compression Fittings

Hep2O® pipe is suitable for connecting to compression fittings complying with BS EN 1254. Cut the Hep2O® pipe with the recommended cutters and proceed as shown below.


Insert support sleeve into pipe	Ensure pipe is fully inserted

Apply PTFE if required	Tightening nut

Note: Hep2O® pipe will not rotate in a compression fitting after tightening.

Use a support sleeve when making a compression joint.

Ensure pipe is fully inserted.

Use PTFE tape over olive if lubrication required.

Copper olives are preferable to brass ones.

DON'T

Use oil based jointing compounds.